General :We at Crystal manufacture a wide range of IC Programmer and Tester Products, A survey
made among our clientele revealed the need for an Economical Programmer that would cater to the Standard Requirements of Small and medium scale Entrepreneurs. The Crystal 6044 and 6045 Versatile & Economical Programmer and Testers are the outcome of this survey. the 6044 is an ISA BUS compatible Programmer consisting of a PC Plug in card and an External POD Module. The 6065 is an External Programmer which interface to the PC via the either the Parallel Port or the Serial Port of the PC. It has built in Micro-controller so as to make it fast in spite of the Port Interface.
This Programmers are capable of following :
• Programming of EPROM's from 27161 ( 16K ) to 27c080 (8Mb)
• Programming of Flash EEPROMs 27xx, 28xx and 29xx series.
• Programming of Parallel EEPROMs 28xx Series.
• Programming of Serial EEPROMs of 24LC\C\FC\AA Series.
from 1 Kb to 1 Mb and 93CXX series upto 16Kb.
• Programming of Micro controllers Atmel Philips and Winbond
( 187C51, AT89Cxxx, P89Cxx, P87Cxxx, P87LPCxxx W78Exxx etc. )
• Logic Functional Testing of Digital ICs : 74/54xxx and 40/45xxx.
The Programmer Package for 6064 consists of a PC Bus Adaptor Card, an External Pod a connecting cable and the Software. The PC Bus Adapter plugs into any ISA Slot of an IBM PC / AT Computer. The Connecting Cable connectors the External Pod to the PC Bus Adapter Card. The Software provided has be installed in to the Hard Disk.
The Programmer 6044 consist of : the Main Programmer unit having built in Batteries, one charger unit which plug in to a 230 Vac Mains outlet and provides power for the main unit and charges the batteries inside the main unit and charges the Batteries inside that min Main Unit, and set of 2 Connecting Cables-1 each for Parallel Port interface and Serial Port interface. the Programmer has to be connected to the PC via any of the 2 Ports of the PC and the Software provided will have to be installed into the Hard Disk. The Software will detected the correct interface mode of the Programmer. Important Features :
Some of the important features of these Programmers are as follows :
• Runs on MSDOS Platform within a DOS Window under Windows.
• EPROM Programming Functions
• Programs standard EPROMs upto 8 Mb ( 1 M x 8 )
• Programs Voltage Selectable ( 12.5 / 21 / 25V )
• Programming Speed Selectable.
• Program, read, Blank Check, Compare functions.
• Copy function to copy data from one EPROM to others.
• Serial EPROM Programming Functions
• Programs serial EEPROMs of the 24LC\C\FC\AA Series, from 1Kb to 256Kb.
• Programs serial EEPROMs of the 93C Series up to 16Kb,
• Program, read, Verify, Compare, Erase functions.
• Micro Controller Programming Functions.
• Atmel 87Cxx/89C51/52/55/89S8252/89C55WD
• Atmel 89C1051/2051/4051
• Atmel AT90SXX Microcontrollers.
• Philips 89Cxx/89C51RX+/89C51RX2/ 87Cxx/87LPCxx
• Winbond 78Exx Series.
• Program, read, erase, Blank Check, Compare functions.
• Encrypt and Protect Device function for data security.
• Auto Function for Erase Program and Protect in 1 command.
• 1MB Buffer
• Powerful Buffer Editing Features including Fill, checksum, ASCII Edit etc.
• Loading, Editing and Saving Files.
• IC Testing Functions.
• Tests most of the TTL (74xxx Series) & CMOS (4xxx Series)
• Tests ICs functionally for logic operations as per Truth Tables
• Tests and identifies and unknown IC from the above Series.SPECIFICATIONS :
• System Requirements
• IBM PC / AT 486 /586 PII / PIII of compatible machine
• MSDOS Platform / MSDOS Support.
• Power Requirements ( Model 6044 )
• +5V (4.7V - 5.3V), Max Current 1.0A
• +12V ( 11.0V - 13.0V ), Max Current 0.2A
• Power Requirements ( Model 6045 )
• 10 Vac Mains Adapter, Max Current 500 mA.
• I / O Address ( Model 6044 )
• Selectable from 200H to 360H. ( Occupies 16 Addresses )
• I / O Address Port ( Model 6045 )
• Any of the LPT1, LPT2, LPT3 COM1 or COM2 Ports can be used to interface the Programmer
card. The Software will Automatically detected the interface Port Used.
• Capabilities
• Programming of EPROMs
• Programming of serial EEPROMs
• Programming of Microcontrollers
• Programming of Flash EPROMs
• Testing of ICs
• Package Contents ( 6044 )
• One PC Bus Adaptor Card.
• One External Pod.
• One Connecting Cable.
• One Software set on 1.44MB Floppy Disks / CD
• Package Contents ( 6045 )
• One Main Programmer Unit
• One Power Adapter Unit.
• One Connecting Cable for Parallel and Serial Ports
• One Software set on 1.44MB Floppy Disks / CD |
